Issue Symptons:
- Normally, each firewall rule on the SRX auto-updates a snmp counter for hit-count, regardless of whether ‘count’ is configured or not. Juniper Space Security Director periodically polls these OIDs and updates the hit-count.
- In Junper Space 16.1 R1, the issue found is unable to view policy
hit counts from Juniper Space Security Director, but SRX itself is keep updating.
Actions Taken:
- Verify Security Appliance Policy Hits from Command line
root@fw-mgmt-2> show security policies hit-count node1: -------------------------------------------------------------------------- Logical system: root-logical-system Index From zone To zone Name Policy count 1 Vlan2 Vlan1 Baramondi_Monitor 0 2 Vlan2 Vlan1 10 4428 3 Vlan2 Vlan1 50 0 4 Vlan2 Vlan1 40 11136 5 Vlan2 Vlan1 default-logdrop 0 6 Vlan2 Vlan1 53 2007 7 Vlan2 Vlan1 54 0 8 Vlan2 Vlan1 55 0 9 Vlan2 MGMT 6 538 10 Vlan2 MGMT 23 0 11 Vlan2 MGMT 74 2 12 Vlan2 MGMT default-logdrop 81 13 Office Vlan1 default-logdrop 0 14 Office Vlan1 60 447 15 Office Vlan1 Office_Archive 0 16 Office Vlan1 58 0 17 Office Vlan1 Baramondi_Monitor-1 0 18 Office MGMT Office_Archive-1 0 19 Office MGMT default-logdrop 0 20 Vlan1 Vlan2 Baramondi_Rules 0 21 Vlan1 Vlan2 VA 0 22 Vlan1 Vlan2 A_Office_2_Vlan2 292 23 Vlan1 Vlan2 default-logdrop 1696 24 Vlan1 Office VA-1 0 25 Vlan1 Office Baramondi_Rules-1 0 26 Vlan1 Office Device-Zone-1 0 27 Vlan1 Office 4 1299 28 Vlan1 Office default-logdrop 0 ........
It is clearly there is hit counts on SRX itself, but they are not being pulled/pushed into Space. Log collecter has beenconfigured and it is receiving logs from this SRX.
Solutions:
- Let Juniper Space manually probe latest policy hits
From Firewall Policies page, you can manually
- This is a known issue reported in 16.1R1 version and the
workaround to resolve this issue is the following:
From
Space CLI run the following command:
Space CLI run the following command:
mysql
-ujboss -pnetscreen sm_db -e “update RuntimePreferencesEntity set
value=’2′ where name=’POLICY_HIT_COUNT_MAX_SUBJOBS_PER_NODE’;”
Space release 16.1R2.7 (381623)
Last login: Fri Sep 8 15:27:35 2017 from 10.9.200.168
Welcome to the Junos Space network settings utility.
Initializing, please wait
Junos Space Settings Menu
1> Change Password
2> Change Network Settings
3> Change Time Options
4> Retrieve Logs
5> Security
6> Expand VM Drive Size
7> (Debug) run shell
A> Apply changes
Q> Quit
R> Redraw Menu
Choice [1-7,AQR]: 7
[sudo] password for admin:
[root@space-c6186f1b3edb ~]#
[root@space-c6186f1b3edb ~]#
[root@space-c6186f1b3edb ~]#
[root@space-c6186f1b3edb ~]# mysql -ujboss -pnetscreen sm_db -e "update RuntimePreferencesEntity set value='2' where name='POLICY_HIT_COUNT_MAX_SUBJOBS_PER_NODE';"
Warning: Using a password on the command line interface can be insecure.
[root@space-c6186f1b3edb ~]#
- RESTART JBOSS:
First, identify which node has the vip
(eth0:0). Check each node with the following:
(eth0:0). Check each node with the following:
# ifconfig
eth0:0
eth0:0
Recommended restart process (only
if JBOSS restart is needed):
if JBOSS restart is needed):
1.
Stop processes on all JBOSS nodes
# service jmp-watchdog stop
# servicejboss stop
# service jboss-dc stop
Note: jboss-dc is only active on VIP node, but the command won’t do
any harm
Stop processes on all JBOSS nodes
# service jmp-watchdog stop
# servicejboss stop
# service jboss-dc stop
Note: jboss-dc is only active on VIP node, but the command won’t do
any harm
2.
Confirm if JBOSS has been turned off
Confirm if JBOSS has been turned off
# service
jboss status
jboss status
3.
Start services on the vip node
# service jmp-watchdog start
Note: watchdog starts other processes
Start services on the vip node
# service jmp-watchdog start
Note: watchdog starts other processes
4.
After you can login, start services on all of the other nodes
# service jmp-watchdog start
After you can login, start services on all of the other nodes
# service jmp-watchdog start
[root@space-c6186f1b3edb ~]# service jmp-watchdog stop
[root@space-c6186f1b3edb ~]# service jboss stop
found and stop jboss
[root@space-c6186f1b3edb ~]# service jboss-dc stop
stop domain controller
[root@space-c6186f1b3edb ~]# service jboss status
jboss is stopped
[root@space-c6186f1b3edb ~]# service jmp-watchdog start
jmp-watchdog running
[root@space-c6186f1b3edb ~]# ifconfig eth0:0
eth0:0 Link encap:Ethernet HWaddr C6:18:6F:1B:3E:DB
inet addr:10.9.200.22 Bcast:10.9.200.127 Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:145
